King Ranch Colors

FEATURES: Easy to apply. Original look & feel.

APPLICATION: Match color, then add #SL-7 crosslinker (1/4oz per 8oz of color) . Remove stains as much as possible (#TC- triclean prep cleaner works well, allow to dry). Spray a light coat, allow to dry, then check for feel of leather. Spray additional coats as needed. To increase gloss, spray a coat of crosslinked aniline clear base.

ADDITIVES: #SL-7 super crosslinker (always add - 1/4 oz per 8oz of color).

PREP CLEANING: 
Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process. Lightly sand the leather with #600 sandpaper. This will help to break the surface coating and allow penetration (always sand before using color #SAC-707). 
Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will accept aniline dye. If the water beads up with no dark circle, a second or third cleaning is required.

APPLICATION: Semi-aniline leather finish.

Color: SAC-707 Chaparrel. 
This color has a semi-aniline finish. A light topcoat protective clear is applied by the factory over the color to help resist staining. 
After prep cleaning, a light sanding with #600 sandpaper is required to remove the protective topcoat. 
1) Check color match. Mix #SL-7 crosslinker (1/4oz per 8oz of color). into the semi-aniline dye color. 
2) Apply a light coat of the semi-aniline dye color by spray, wipe on or brush on method. 
3) Allow to dry. A hair dryer may be used to speed drying. 
4) Apply additional coats as needed, allowing each coat of color to dry to touch. 
5) To slightly increase the gloss, apply a top coat clear of #SAC - semi- aniline clear mixed with crosslinker (#SL-7 - 1/4oz per 8oz of color).

ADDITIVES: Always add #SL-7 super crosslinker (1/4oz per 8oz of color). Makes the color permanent.

CLEANING: #TC - Triclean prep cleaner

TOPCOAT CLEAR: #SAC - semi-aniline clear base (always add 2% #SL-7 crosslinker)