Materials: razor blade, (SPG) powergel or (63) Velour base adhesive, sub-patch material, and (HH66) sub-patch adhesive.

1) Small holes:
a. Cut out charred or damaged fibers.
b. Scrape fibers from an area under the seat using a razor blade on its side, gently scrap.
c. Fill hole with (SPG) powergel, or (63) adhesive and apply fibers.
2) Large holes:
a. Cut out charred or damaged fibers.
b. Apply sub-patch material somewhat larger than damaged area by applying (HH66) sub-patch adhesive or (PT-20) Slo-Zap to top of sub-patch and bottom of carpet.
c. Cut a patch (piece of carpet) from under seat or dash where it is not in view. Apply to hole using (HH66) sub-patch adhesive or (SPG) powergel.
d. Scrape fibers from under seat and place around patch with (SPG) powergel or (63) adhesive.
3) Dye if necessary.